The core part of the electric sightseeing vehicle is the liquid-rich lead-acid battery. Different from the maintenance-free battery, the liquid-rich lead-acid battery needs frequent water maintenance. The methods and details of the electric sightseeing vehicle battery should be paid attention to:

Electric sightseeing vehicle battery water refill precautions:

1. Rich liquid lead-acid battery in the use of water will naturally lose, resulting in a drop in the liquid level, need to regularly unscrew the liquid hole cover, check the battery in each single cell liquid level height, in any case, to ensure that the battery plate is completely covered by the liquid level, water use will greatly shorten the life of the battery.

2. Under normal circumstances, the higher the ambient temperature, the more frequently the liquid-rich lead-acid battery is used, the longer the service time, and the faster the water loss. Normal liquid level check cycle: recommended once every two months in summer and once a month in winter. For batteries that have been used for more than one year, shorten the inspection period as appropriate.

3. Use distilled or deionized water for lead-acid batteries. Do not use tap water, well water, or river water, or directly add acid to batteries. General water impurity ion content is high, will damage the battery.

4. Do not refill the battery until the battery is fully charged. If the plate is exposed to the liquid level before charging, add an appropriate amount of pure water to cover the plate, and then add the liquid level to the specified height after charging.

5. Determine the liquid level: Add water to the position 3-4mm below the lowest end of the liquid level indicator (the plastic part deep into the battery inside the liquid injection hole). Do not add too much water, liquid level do not touch the bottom of the liquid hole plug, so as not to overspill acid battery.

Introduction of battery water replenishment method for electric sightseeing vehicle

Battery intelligent water system is the company independent research and development of patented products, is a battery development in view of the rich fluid automatic filling equipment, can fully replace the artificial water battery maintenance operations, real-time monitoring of battery and dehydration, automatic filling water, with water induction automatic stop, after the installation of equipment can keep the electrolyte level the entire in health, to ensure that the battery electrolyte features stable, balance, Optimize the efficiency of storage battery equipment and extend the service life of storage battery.

The intelligent water adding system of Lianhong starts from the whole manual maintenance process, integrates mature technologies and products in the market, and combines the intelligent control components independently developed by Lianhong, and completely completes the automatic replacement of manual links in the water adding and maintenance.

Main functions: comprehensively take over the maintenance of lead-acid battery water adding (to achieve water-free battery)

Battery intelligent water adding system working principle:

The sensing liquid injection valve monitors the battery level information in real time. When the battery is short of water, the automatic water adding controller starts to pump water from the tank to all battery cells at the same time through the liquid injection pipe valve kit. The liquid injection valve automatically closes the corresponding water injection port after the water injection is completed in the corresponding cell. When all water injection ports are closed, the automatic water adding controller automatically stops the water adding process and transfers to the liquid level monitoring process when it detects that there is no water adding flow.

Most of the mainstream water refill methods on the market are manual water adding, which is easy to cause water leakage and lead to the failure of battery life. Intelligent storage battery water adding system can effectively solve the problems of tedious, error-prone and unstable manual maintenance during storage battery water adding maintenance. For more details about the intelligent water adding system of the battery, welcome to inquire.