The accumulators of electric sightseeing vehicles generally use rich liquid batteries. Compared with maintenance-free accumulators, they need to be inspected irregularly and maintained by adding water. Today, Lianhong Xiaobian will talk with you about the details of electric sightseeing car battery water need to pay attention to.

Electric sightseeing vehicles generally use lead-acid batteries or maintenance-free batteries. In the use of lead-acid batteries, water will be naturally lost, resulting in a drop in the liquid level. It is necessary to regularly unplug the liquid hole cover and check the liquid level in each cell of the battery. Generally, the battery liquid needs to cover the plate with a height of 3-4mm, and the liquid level must not be lower than the plate.

The following points should be paid attention to the water supply of electric sightseeing car battery:

1. After the battery is fully charged, water the battery. Before charging, if the plate is exposed to the level meter, first add some pure water to cover the plate, and then add the level meter to the specified relative height after charging.

2. When adding water to batteries, make sure to use distilled water or deionized water for batteries. Do not use ordinary tap water, well water or river water, or directly add acid to the battery.

3. Generally speaking, the higher the ambient temperature, the more frequent the use of the liquid-rich battery, the longer the use time, the faster the water consumption. Normal liquid level check cycle: once every half month in summer and once every month in winter. For batteries that have been used for more than one year, the inspection period should be shortened appropriately according to the situation.

4. Determine the height of the liquid level: Add water to the bottom of the liquid level indicator (the plastic part of the injection hole deep inside the battery) at a height of 3-4mm. (Do not add too much water, and the liquid level should not contact the lower end of the liquid hole plug, so as to avoid battery acid overflow!)

5.During the use of liquid-rich batteries, water will naturally lose, resulting in lower liquid level. It is necessary to periodically open the liquid hole cover and check the height of the liquid level in each cell of the battery.

Electric sightseeing car battery water refill tool

Battery automatic filling water system is lian hon a patent product of independent research and development production, is a battery development in view of the rich fluid automatic filling equipment, can fully replace the artificial water battery maintenance operations, real-time monitoring of battery and dehydration, automatic filling water, with water induction automatic stop, after the installation of equipment can keep the electrolyte level the entire in health status, Ensure the battery electrolyte characteristics are stable and balanced, optimize the use efficiency of battery equipment, and extend the service life of battery. Lianhong automatic water replenishing equipment retains the advantages of high stability, strong environmental adaptability and low price of ordinary lead-acid batteries. At the same time, it has obtained a stable service life and great maintenance convenience at a very low cost, and has a very considerable cost performance.

Lham Energy is a high-tech enterprise integrating research and development, production and sales. Lianhong has always focused on battery accessories and supporting related businesses. The main products are: battery status indicator, battery safety valve, battery equalizer, forklift battery automatic water refill system, battery water alarm, battery water gun. For more information, please call: 0710-3313598