Sail battery in the market visibility is very high, this battery must pay attention to add distilled water, otherwise the battery short circuit, affect its use, but the battery water maintenance work is often not taken seriously. In view of the sail battery how to add water this problem, the following discussion.

Sail accumulator due to water loss serious will cause the battery sulfide and not save electricity problems, if battery is caused by serious sulfide or water loss, and their appearance is not broken, ballooning, show no sign of a short circuit, open circuit, can give the battery repair of water, add water must be added deionized water or pure water, do not add water, can cause the problem of battery self-discharge.

The traditional water adding method is as follows:

1. Discharge the battery completely first;

2. Take out the cover sheet and clean it for later use;

3. Add water manually;

4. After standing for about an hour, install the safety valve and the cover piece;

5, charge, fully charged and then complete discharge of the battery, such a cycle of two to three times.

The above are many maintenance personnel adding water methods, and manual adding water is not only inefficient, but also consumes a lot of time. And often there will be easy to forget, easy to mistake and other problems. Is there a safe, convenient and efficient way to add water? Of course, there are a lot of battery water tools on the market now, such as: battery water gun, battery water system, etc., can ensure that the level of each battery lattice is high, ensure that the battery working environment is stable, and reduce the abnormal loss of the battery to a minimum.

Intelligent water adding method of sail battery

1. Add water gun to battery

It is a special tool for water replenishment of lead-acid batteries. It can make water replenishment of batteries convenient, safe and efficient. The water gun adds water with one key, the muzzle is equipped with a limit baffle to control the height of the liquid level, and the water is full and automatically stopped by induction. This type of water gun is easy to carry and can be used as needed. It can effectively solve the problems of inaccurate manual water adding control, excessive or insufficient water adding.

Battery water gun is a battery water maintenance tool independently developed by Lianhong. The built-in water pump, mobile power supply, and liquid level sensing circuit can easily refill water to the battery. One-click water refill and automatic inductive shutdown can effectively ensure the consistency of the water level, effectively improve the efficiency of water adding and maintenance, and ensure the consistency of battery unit characteristics after water adding and maintenance. Improve battery efficiency and service life.

2. Intelligent water adding system

Battery intelligent water system is the company independent research and development of patented products, is a battery development in view of the rich fluid automatic filling equipment, can fully replace the artificial water battery maintenance operations, real-time monitoring of battery and dehydration, automatic filling water, with water induction automatic stop, after the installation of equipment can keep the electrolyte level the entire in health, to ensure that the battery electrolyte features stable, balance, Optimize the efficiency of storage battery equipment and extend the service life of storage battery.

Here is the introduction of the sail battery water adding tool. The above two are the two most commonly used water replenishment tools on the market. You can choose according to the actual needs. Battery maintenance work can not be ignored, good maintenance can effectively extend its service life, more battery maintenance skills, can pay attention to our dynamic.