欢迎您访问湖北联鸿能源科技有限公司网站,我司主营汽车蓄电池配件、工业蓄电池维护保养产品
全国咨询热线:0710-3313598
News
News

News

Industry information

How to determine whether the battery internal water?

来源:www.hblhnykj.com作者:Hubei Lham时间:2023-08-29

Car battery, is related to the core of the vehicle power, some owners are concerned about, after the vehicle soaked in water, the battery can still be used normally? In fact, whether the car battery can be used normally, mainly depends on whether there is water inside the battery, once the battery is flooded inside, it is not recommended to continue to use.


So, how to determine whether the battery internal water?

 

First of all, you need to check whether the car battery is an AGM battery or an ordinary liquid-rich battery. AGM battery is generally assembled on the start and stop, the use of closed valve control design, usually (especially wading state), AGM battery will not open exhaust, in a fully sealed state, so there is no risk of water, not afraid of water.

1692866505826.jpg

However, it is recommended that the vehicle go to the professional store in time after wading into the water, clean and dry the battery surface, and carry out the battery health status detection and end column maintenance before continuing to use.

 

If it is an ordinary rich liquid battery, you need to determine whether the water level is not over the battery top cover, if the water level is lower than the car battery top cover, then the battery is not at risk of water; If the water level is not above the top cover, it is recommended to replace the car battery.

 

Because the top cover of the battery has a vent hole, the water will enter the battery along the vent hole after soaking. The water mixed with various metals and trace elements will cause the car battery to short circuit and cause the electrolyte to be diluted, which has a great impact on the performance and life of the battery, and there is a great safety risk, can not continue to use, it is recommended to replace the new Valta AGM battery.

1692866523896.jpg

Valta AGM batteries, leading technology, are the batteries with strong performance and very high safety index on the market today.

 

It uses adsorbed fiberglass partition technology and enhanced Power-Frame® Volt-double ® grid technology, such as a highway type current path design, for greater electrical conductivity. Compared with ordinary batteries, Valta AGM batteries have more excellent discharge capacity, even if frequent deep discharge, it is not easy to cause loss of battery capacity and shorten battery life.

 

In addition, Valta AGM battery adopts negative tolerance high pressure assembly process more vibration resistance, safe without leakage. Not only fearless wading, in the rugged, bumpy complex off-road conditions can also cope with the ease.