Battery forklift is a kind of equipment that is often used in our life and work, and in the process of long-term use, the battery needs to constantly replenish water, otherwise it will affect the battery life and working time, and even need to replace the battery, so we need to master the correct method and time of adding water.

First of all, we need to understand the requirements of adding water to the battery, which helps to extend the service life of the battery. The water level mark of the battery is generally engraved on the battery box, and the key is to master the level of the water level. If the water level is too low, it will lead to the evaporation of sulfuric acid in the electrolyte, the internal power of the battery can not be transmitted normally, and the battery will suffer losses. If the water level is too high, it will affect the electrolytic effect in the battery, reduce the energy storage efficiency of the battery, and even cause the battery to flash.

When adding water, first open the battery cover under the premise of safety protection. When adding water, check whether there is debris in the battery box and ensure that the water inlet is clean and free of dirt to avoid impurities entering the battery. Before each water addition, the power switch of the battery should be turned off, the cap should be opened, and the temperature of the battery cap should be measured below 60℃ with a small horn thermometer. After opening the battery cover, it is not necessary to wait until the battery is completely cooled before adding water, and fresh water should be added to the battery according to the water level sign. It is supposed to check the water level once a week or so. If it is found that the water level is low, it is necessary to add fresh water in time, and add it to the upper limit of the mark line under the premise of ensuring clean water quality, and do not exceed half of the mark line each time, and do not exceed 3-5mm in various types of batteries in general. If you find that the water quality is really good, the water level is too low, you should first turn off the battery power switch, and then add water, but this is easy to cause the whole battery to produce bubbles, easy to cause flash, so we should put the battery for a few hours, and then turn on the power switch to avoid flash.

Finally, after adding water to re-install the battery cover, confirm the sealing of the cover, because the battery contains a higher concentration of sulfuric acid, the water level mark is generally closer to the battery cover, if improper operation, may leak resulting in damage to the battery. After adding water, the safety performance of the battery box should be checked again, paying special attention to the tightness of the battery, checking whether the appearance of the battery is polluted, and whether it is stored correctly to avoid threats to personnel safety.

Manual water capacity often appears water omission, less, more and other problems, will cause battery damage, affect its service life, for this problem, a set of automatic water supply system can be easily solved, complete replacement of manual water maintenance: When to add water, how to add, how much to add the problem, completely complete the automatic replacement of the manual link in the water adding maintenance, the manual water adding maintenance into the automatic maintenance of equipment.

Forklift battery automatic water refill system is a kind of automatic water refill equipment developed for liquid rich battery, which can completely replace the manual water refill maintenance operation of the battery, real-time monitoring of the battery water shortage, automatic water refill, full water induction automatic stop, after installation, the electrolyte level can be kept in a healthy state throughout the whole process to ensure the stable and balanced characteristics of the battery electrolyte. Optimize the efficiency of battery equipment and extend battery life.

The correct method and way of adding water can effectively extend the service life of the battery, improve its efficiency, reduce the number of maintenance and replacement, and protect the environment and personnel safety. Therefore, we need to master these methods, in order to live and work smoothly, you need to adhere to the daily maintenance and repair of the battery.